Prep begins by using metal bond diamond to smooth and flatten floor.

Using a diamond grinder and heavy grit diamonds, the floor is ground to remove the existing epoxies, glues, sealers and paint.

We continue to grind the floor with finer metal bond diamond pads until the desired effect is achieved.

A lithium based densifier is applied and bonds with the concrete. It forms a superior protective surface layer that is stronger, breathable, dense and abrasive resistant. This conforms to “Green Leaf” / “LEED Qualifying” points for your company.

Polishing the floor surface is continued using resin bond diamonds. Requiring anywhere from two to 6 passes, this provides the customer’s desired level of gloss.

A lithium based protective clear coat is applied to harden and seals concrete floors, producing a very hard, dust repellent, chemical resistant and water tight surface.